What is a Variable Frequency Drive?
A variable frequency drive is an electronic device that allows you to start, stop, and control the speed of a three phase motor. It is also a motor starter as it is equipped with overload protection. Read more »
What is the difference between a 'new surplus' motor and a 'factory new' motor?
Our New Surplus electric motors and drives are new and unused overstock or discontinued items offered at lower prices and come with our 90-day warranty.

Factory New products are competitively priced and come with a manufacturers warranty.
Variable frequency drives (VFDs or inverters) now play an important part in major industry.
Within the last 10 years they have been perfected to control and vary the speed of 3 phase electric motors. They serve many purposes, besides speed control. Homeowners and hobbyist alike, who have lathes or milling machines with a 3 phase motor, usually don't have 3 phase power to operate. These VFDs (instead of using a rotary phase converter) can now be used to convert single phase power to 3 phase power. Read more »
 
 
00152EP3ER182TC-S-Dealers Electric-Weg
View Larger
0 Star Rating
0.0
 (Be the first to Write a Review)
 
    
 

1.5 HP, 1200 RPM, 208/230/460 Volts, TEFC, 182/4TC, Footless


Discontinued. Replaced by 00152ET3ER182TC-S
Model #: 00152EP3ER182TC-S  
00152EP3ER182TC-S
 
In Stock:  Yes
HP : 1.5
RPM : 1200
Enclosure : TEFC
Frame : 182TC
Frame : 184TC
Frame Remarks : Round Body
Frame Remarks : Footless
Volts : 208/230/460
Phase : 3
Manufacturer : WEG
Classification : Three Phase
Item Condition : Factory New
Replaces : 00152EP3ERSR182TC
Weight:  78 lbs
Retail Price$580.00
Our Price:
$537.56
You Save:$42.44 (7%)
Qty: 
 

Product is Discontinued. Replaced by 00152ET3ER182TC-S


  • Factory New
  • Output: 1.5 HP
  • Poles: 6
  • Frequency: 60 Hz
  • Torque: 6.64 lb.ft
  • Voltage: 208-230/460 V
  • Frame: 182/4T
  • RPM: 1170
  • Full Load Amps: 5.02-4.54/2.27 A
  • Efficiency (100%): 85.5
  • Power factor (100%): 0.71
  • Insulation: F
  • Noise: 52 dB(A)
  • No load current: 2.89/1.45 A
  • Locked rotor current (II/In): 6.9
  • Service Factor: 1.15
  • FL Amps @ High: 2.27
  • FL Eff (%): 85.5
  • C Dimension (in): 18.465

Replaces 00152EP3ERSR182TC

Electric Motors
: Severe Duty and General Purpose: High Efficiency & NEMA Premium
: Three Phase: W01 (Rolled Steel) - TEFC - High Efficiency
Catalog Number: 00152EP3ER182TC-S

  • Description

    Presenting a whole new electrical and mechanical design, the new platform of Rolled Steel motors are made to run cooler, last longer and to be easier to install and maintain. The High Efficiency motors are specifically designed to meet or exceed all EPAct requirements for energy efficiency. They are certified by the Department of Energy with our Certificate of Compliance number CC029A. These TEFC motors are designed for operating in environments of dirt, dust and moisture, on indoor and outdoor applications, also they are supplied with drip cover as standard making them suitable for vertical. Design B torques and energy efficient designs from 143/5T through 254/6T frames.

  • Features that make a difference
    • New ventilation system for improved thermal performance
    • New and more robust eyebolts design (frames 182/4T and up) plus an additional eyebolt on non-drive end allowing vertical shaft down lifting for frames 213/5T and 254/6T
    • Oversized diagonally split aluminum terminal box that exceeds IP55 requirements and is rotatable in 90 degrees increments for flexibility during installation
    • Option for internal AEGIS® SGR
    • Color coded/numbered leads as standard for easy wiring
    • Regreasable ball bearings on 254/6T frame as standard (optional for 182/4T and 213/5T)
    • Bearing cap as standard
    • IP55 Ingress Protection as standard, being appropriate for severe environments
    • Motor frame painting system resistant to a minimum of 500 hours ASTM B117 salt spray test
    • Suitable for VFD operation as per NEMA MG1 part 31.4.4.2


      Torque

      Turndown Ratio

      Constant

      2:1

      Variable

      1000:1

  • Standard Features
    • Rated Output: 1 to 25 HP
    • Number of Poles: 2 to 6
    • Class F insulation (B temperature rise)
    • Frame Sizes: 143/5T to 254/6T
    • Rated voltage: 208-230/460 V
    • Frequency: 60 Hz (dual rated 50 Hz 190-220/380-415V)
    • IP55 enclosure
    • F1 C-face footless mount as standard
    • Aluminum NDE endshield
    • Cast Iron flanges for improved strength (182/4TC and above), Aluminum on 143/5TC frame
    • Internal bolts, giving a clean surface to the motor, avoiding trapping materials and allowing easy paint job after assembly to the load, if required
    • Double shielded ball bearings on frames up to 213/5T. Regreasable ball bearings on 254/6T frame
    • Standard bearing cap in all frames (flanged motors only)
    • Ambient temperature: -20 °C to +40 °C
    • 1040/45 carbon steel shaft
    • Drip cover

  • Optional Features - Call Dealers for information on price and availability of optional features
    • F2 and F3 mount
    • Enclosure: TENV, TEAO
    • Voltage: 575V, 200/400V and others (no 50Hz rating)
    • Regreasable bearings on 182/4T and 213/5T
    • Double sealed ball bearings
    • Internal Aegis® SGR
    • Space heater and thermal protection (thermostats and thermistors)

  • Applications
    • Pumps
    • Compressors
    • Fans
    • Machine Tools
    • Other general purpose

  •  Average Rating:  0 Star Rating
    0.0
     
    Write a Review

    Related Products