75 HP, 3600 RPM, 208-230/460 Volts, TEFC, 365TSC, FOOTLESS, TECO, NV0752C

MAX-SE

AEVANE, HIGH EFFICIENCY, ROUND BODY C-FACE [NV_C]

APPLICATIONS:


• Fans & Blowers
• Compressors
• Pumps
• Mixers
• Crushers
• Conveyors

FEATURES:


• Output: 75 HP

• Speed: 3600 RPM

• Voltage: 208-230/460 Volts @ 60 Hz

• Frame: 365TSC

• Full Load Efficiency: 93%

• Full Load Power Factor: 93.5%

• Full Load Amperage: 81A

• Enclosure: Totally Enclosed Fan Cooled (IP54)

• Service Factor: 1.15 @ 60Hz (Continuous); (1.0 @ 50 Hz)

• Factory Self-Certified for Class I Div. 2 Groups B C D - Temp Code T3C Minimum

• Insulation: Class F

• Temperature Rise: Class B

• NEMA Design B Torques as a Minimum; Various Ratings also Meet Design C

• Cast Iron Frame

• End Brackets

• Main Conduit Box; Rolled Steel Fan Cover

• Grounding Terminal: Inside Main Conduit Box

• Conduit Box: Oversized and Rotatable in 90 Degree Increments - F1 Mounted

• Ambient Temperature: Designed for 40°C

• Elevation: Designed for 3300 ft.

• Rotation: Bi-Directional

• Shaft: 1045 Carbon Steel

• Rotor Construction: Aluminum Die Cast Squirrel Cage

• Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat

• Paint Color: Dark Gray - Munsell 7.5B 3.5/0.5

• Bearings: Double Shielded Pre-Packed with MULTEMP SRL for F# 140T - 280T (Non-regreasable)

• Bearings: High Quality Ball (or Roller) Regreasable with Mobil Polyrex™ EM Grease for F# 280TS and Larger

• Automatic Grease Discharge Fittings on Regreasable Models

• Labyrinth Type Metal Flinger on Both Ends for F# 280TS and Larger

• Bearing Caps: Cast Iron Inner and Outer for F#280TS and Larger

• Nameplate: Stainless Steel

• Suitable for Inverter Duty (PWM - Pulse Width Modulation) per NEMA MG-1

• Part 30(4

• 5)

• Inverter Duty Speed Range 20:1 Variable Torque /10:1 Constant Torque

• 9 Leads for 5 HP and Smaller

• 12 Leads for 7.5 HP to 125 HP

• Motors are U.L. Recognized; CSA Approved and CE Marked

• Rubber Dust Flinger on Drive-End for F# 140T - 280T

• Factory Self-Certification for 440T/TS frames requires fan change. Please call Dealers; Additional charge for Division II nameplates.

• Motor service factor is 1.0 when operated on a VFD.

• Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1.


Note: Stock catalog image shown. Actual motor may differ. 

• Performance Data
• Dimensions
• Connection Data
• Product Description
• Instruction Manual
• Submittal Data
• 50Hz Performance Data
• 50Hz Dimensions
• 50Hz Connection Data