5 HP, 3600 RPM, 208/230/460 Volts, TEFC, 184TC, FOOTED, STAINLESS, TECO, WP0052C

STAINLESS STEEL WASHDOWN

AEGP, NEMA PREMIUM, FOOTED C-FACE [WP]

APPLICATIONS:


• Any Application Where the Motor Will be Subjected to High Pressure Spray Down
• Marine Duty 
• Food Processing and Packaging

FEATURES:


• Output: 5 HP

• Speed: 3600 RPM

• Voltage: 208/230/460 Volts @ 60 Hz

• Frame: 184TC

• Full Load Efficiency: 88.5%

• Full Load Power Factor: 91%

• Full Load Amperage: 6.1A

• Enclosure: Totally Enclosed Fan Cooled (IP56) (IEEE 45)

• Service Factor: 1.15 (Continuous); (1.0 @ 50 Hz)

• Insulation: Class F

• Temperature Rise: Class B

• NEMA Design B Torques

• Construction: Stainless Steel Frame / End Brackets / Hardware

• Grounding Terminal: Inside Main Conduit Box

• Conduit Box: Stainless Steel Oversized Main - F3 Mounted (IM1001)

• Ambient Temperature: Designed for < 40°C

• Elevation: Designed for < 3300 ft.

• Rotation: Bi-Directional

• Shaft: SUS304 Stainless Steel

• Rotor Construction: Aluminum Die Cast Squirrel Cage

• Bearings: Double Shielded Pre-Packed with MULTEMP SRL

• Contact Lip Type Seal on Both Ends

• Nameplate: Etched on the Stainless Steel Frame

• Suitable for Inverter Duty (PWM - Pulse Width Modulation) per NEMA MG-1 Part 30(3 / 4)

• Inverter Duty Speed Range: 10:1 Variable Torque / 4:1 Constant Torque

• 9 Leads

• Two Drain Holes on Bottom of Frame and one in the C-Flange

• Motors are U.L. Recognized; CSA Approved and CE Marked

• Department of Energy Efficiency Certificate # CC082A

• Motor service factor is 1.0 when operated on a VFD.

• Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1.



Note: Stock catalog image shown. Actual motor may differ. 

Documentation

• Perfomance Data
• Dimensions
• Connection Data
• Product Description
• Instruction Manual
• Submittal Data