700 HP, 1800 RPM, 2300/4000 Volts, TEFC, 5810VP, VSS, TECO, VSKTP7004

VERTICAL SOLID SHAFT TEFC
HIGH THRUST with "P" BASE - MEDIUM VOLTAGE

AEHCED, PREMIUM EFFICIENCY [VSKTP]

APPLICATIONS:


• Deep Well Turbine Pumps
• Irrigation
• Water/Wastewater

FEATURES:


• Output: 700 HP

• Speed: 1800 RPM

• Voltage: 2300/4000 Volts @ 60 Hz

• Frame: 5810VP

• Full Load Efficiency: 95.9%

• Full Load Power Factor: 84.6%

• Full Load Amperage: 80.5A

• Enclosure: Totally Enclosed Fan Cooled (IP55)

• Service Factor: 1.15 (Continuous on Sine Wave Power)

• Inverter Duty: (PWM) per NEMA® MG-1 Part 31 at 1.0 Service Factor

• Standard Features: Non-Sparking Ball Type NRR; Drip/Splash Cover; Space Heaters (120V)
  5000 Frames and Above also include Mounting Provisions for bearing RTD's and Insulated Bearing Housing

• CSA Certified: for Class I Div. 2 Groups B C D; Temp Code T3 Maximum

• Insulation: Class F with VPI Epoxy Resin Varnish

• Temperature Rise: Class B

• NEMA Design B Torques

• Conduit Box: Oversized Rotatable in 90 Degree Increments - Fully Gasketed with NPT Threaded Entrance

• Conduit Box: Steel Plate Conduit Box with Threaded Connection Opening(s)

• Ambient Temperature: Designed for < 40°C

• Elevation: Designed for < 3300 ft.

• Bearings: Oversized Angular Contact or Spherical Thrust Bearing Installed

• Rotation: Counterclockwise (CCW); Viewed from Top

• Construction: Cast Iron Frame & End Brackets; Steel Plate Fan Cover

• Shaft: 1045 Carbon Steel

• Rotor Construction: Aluminum Die Cast Squirrel Cage for F#449VP and Below

• Rotor Construction: Squirrel Cage Copper or Copper Alloy Bar for F#5000

• Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat

• Paint Color: Blue - Munsell 5PB 3/8

• Guide Bearings: Re-Greasable with Mobil Polyrex™ EM Grease

• Thrust Bearings: Oil Lubricated Angular Contact or Spherical Thrust bearing with Site Glass

• Oil Requirements: 300 S.S.U. @ 100°F

• Automatic Grease Discharge Fittings on Frames with Re-Greasable Motors

• Labyrinth Type Metal Flinger on Both Ends for Frames 320VP & Up

• Grounding Terminal: Inside Main Box

• Nameplate: Stainless Steel

• VFD Rated: per NEMA MG1

• Part 30

• Speed Ranges: 10:1 Variable Torque; 4:1 Constant Torque

• 6 Leads

• UL Recognized and CSA Approved

• Precautions Should Be Taken to Eliminate or Reduce Shaft Currents that May Be Imposed on the Motor by the VFD as stated per NEMA MG1 Part 30.4.4.3.


Note: Stock catalog image shown. Actual motor may differ.