25 HP, 1800 RPM, 230/460 Volts, TEFC, 284TP, , TECO, VHP0254

VERTICAL HOLLOW SHAFT WPI
HIGH THRUST with "P" BASE - LOW VOLTAGE

AMRCNH, (MAX-VHP™) NEMA PREMIUM [VHP]*

APPLICATIONS:

Deep Well Turbine Pumps
• Irrigation
• Fluid Handling Systems
• Water/ Waste Water

FEATURES:


• Output: 25 HP

• Speed: 1800 RPM

• Voltage: 230/460 Volts @ 60 Hz

• Motors Suitable for Reduced Starting Voltage

• Frame: 284TP

• Full Load Efficiency: 93.6%

• Full Load Power Factor: 85%

• Full Load Amperage: 29.4A

• Enclosure: Totally Enclosed Fan Cooled (IP54)

• Service Factor: 1.15 (Continuous on Sine Wave Power)

• Inverter Duty: (PWM) per NEMA® MG-1 Part 31 at 1.0 Service Factor

• Standard Features: Coupling w/ Gib Key; Non-Sparking Ball Type NRR; Drip/Splash Cover

• Space Heaters (120V)

• CSA Certified: for Class I ; Div. 2 ; Groups B C D; Temp Code T3 Maximum

• Insulation: Class F with VPI Epoxy Resin Varnish

• Temperature Rise: Class B

• NEMA Design B Torques

• Conduit Box: Oversized Rotatable in 90 Degree Increments - Fully Gasketed with NPT Threaded Entrance

• Conduit Box: Steel Plate with Threaded Connection Opening(s)

• Ambient Temperature: Designed for < 40°C

• Elevation: Designed for < 3300 ft.

• Thrust Bearing: Oversized Angular Contact or Spherical Installed

• Rotation: Counterclockwise (CCW); Viewed from Top

• Construction: Cast Iron Frame & End Brackets

• Shaft: 1045 Hollow Carbon Steel

• Rotor Construction: Aluminum Die Cast Squirrel Cage for F#449TP

• Rotor Construction: Squirrel Cage Copper or Copper Alloy Bar for F#5000 and Above

• Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat

• Paint Color: Blue - Munsell 5PB 3/8

• Bearings: Vacuum De-Gassed Re-Greasable Ball Frames -5007TP & Up with Mobil Polyrex™ EM Grease

• Guide Bearings: 324TP - 5810TP Frames are Re-Greasable with Mobil Polyrex™ EM Grease

• Thrust Bearings: 5009 - 5810TP Frames are Oil Lubricated Angular Contact or Spherical Thrust Bearing with Site Glass

• Oil Requirements: for 444TP - 5810TP Frames: 300 S.S.U. @ 100°F

• Grease Discharge Fittings: on Frames with Re-Greasable Motors

• Bronze Labyrinth Type Metal Flinger on Lower End Bracket

• Grounding Terminal: Inside Main Box

• Nameplate: Stainless Steel

• VFD Rated: per NEMA MG1

• Part 31

• Speed Ranges: 10:1 Variable Torque

• 6 Leads

• UL Recognized and CSA Approved

• Precautions Should Be Taken to Eliminate or Reduce Shaft Currents that May Be Imposed on the Motor by the VFD as stated per NEMA MG1 Part 30.4.4.3.

• Ball Type NRR Provided


Note: Stock catalog image shown. Actual motor may differ. 

Documentation

• Perfomance Data
• Dimensions
• Connection Data
• Product Description
• Instruction Manual
• Submittal Data
• 50Hz Perfomance Data
• 50Hz Dimensions
• 50Hz Submittal Data
• 50Hz Connection Data