350 HP, 1200 RPM, 2300/4000 Volts, TEFC, 5808P,  , TECO, VHKTP3506

VERTICAL HOLLOW SHAFT TEFC
HIGH THRUST with "P" BASE -MEDIUM VOLTAGE

AEHCNH, PREMIUM EFFICIENCY [VHKTP]

APPLICATIONS:


• Deep Well Turbine Pumps
• Irrigation
• Water/Wastewater

  FEATURES:

  
  
  • Output: 350 HP
  
  • Speed: 1200 RPM
  
  • Voltage: 2300/4000 Volts @ 60 Hz
  
  • Motors Suitable for Reduced Starting Voltage
  
  • Frame: 5808P
  
  • Full Load Efficiency: 95.2%
  
  • Full Load Power Factor: 80.4%
  
  • Full Load Amperage: 42.5A
  
  • Enclosure: Totally Enclosed Fan Cooled (IP54)
  
  • Service Factor: 1.15 (Continuous on Sine Wave Power)
  
  • Inverter Duty: (PWM) per NEMA® MG-1 Part 31 at 1.0 Service Factor
  
  • Standard Features: Coupling w/ Gib Key; Non-Sparking Ball Type NRR; Drip/Splash Cover
  
  • Space Heaters (120V)
  
  • CSA Certified: for Class I ; Div. 2 ; Groups B C D; Temp Code T3 Maximum
  
  • Insulation: Class F with VPI Epoxy Resin Varnish
  
  • Temperature Rise: Class B
  
  • NEMA Design B Torques
  
  • Conduit Box: Oversized Rotatable in 90 Degree Increments - Fully Gasketed with NPT Threaded Entrance
  
  • Conduit Box: Steel Plate with Threaded Connection Opening(s)
  
  • Ambient Temperature: Designed for < 40°C
  
  • Elevation: Designed for < 3300 ft.
  
  • Thrust Bearing: Oversized Angular Contact or Spherical Installed
  
  • Rotation: Counterclockwise (CCW); Viewed from Top
  
  • Construction: Cast Iron Frame & End Brackets
  
  • Shaft: 1045 Hollow Carbon Steel
  
  • Rotor Construction: Aluminum Die Cast Squirrel Cage for F#449TP
  
  • Rotor Construction: Squirrel Cage Copper or Copper Alloy Bar for F#5000 and Above
  
  • Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
  
  • Paint Color: Blue - Munsell 5PB 3/8
  
  • Bearings: Vacuum De-Gassed Re-Greasable Ball Frames -5007TP & Up with Mobil Polyrex™ EM Grease
  
  • Guide Bearings: 324TP - 5810TP Frames are Re-Greasable with Mobil Polyrex™ EM Grease
  
  • Thrust Bearings: 5009 - 5810TP Frames are Oil Lubricated Angular Contact or Spherical Thrust Bearing with Site Glass
  
  • Oil Requirements: for 444TP - 5810TP Frames: 300 S.S.U. @ 100°F
  
  • Grease Discharge Fittings: on Frames with Re-Greasable Motors
  
  • Bronze Labyrinth Type Metal Flinger on Lower End Bracket
  
  • Grounding Terminal: Inside Main Box
  
  • Nameplate: Stainless Steel
  
  • VFD Rated: per NEMA MG1
  
  • Part 31
  
  • Speed Ranges: 10:1 Variable Torque
  
  • 6 Leads
  
  • UL Recognized and CSA Approved
  
  • Precautions Should Be Taken to Eliminate or Reduce Shaft Currents that May Be Imposed on the Motor by the VFD as stated per NEMA MG1 Part 30.4.4.3.
  
  • Ball Type NRR Provided
  
  

  Note: Stock catalog image shown. Actual motor may differ.