15 HP, 1800 RPM, 230/460 Volts, TEFC, 254JM, CLOSED COUPLED PUMP TEFC JM/JP, TECO, JMP0154

CAST IRON TEFC JM

AEHH8NJM, NEMA PREMIUM, CLOSE-COUPLED [JMP]

APPLICATIONS:


• Pumps


FEATURES:


• Output: 15 HP

• Speed: 1800 RPM

• Voltage: 230/460 Volts @ 60 Hz

• Frame: 254JM

• Full Load Efficiency: 92.4%

• Full Load Power Factor: 88%

• Full Load Amperage: 17.3A

• Enclosure: Totally Enclosed Fan Cooled (IP54)

• Service Factor: 1.15 (Continuous); (1.0 @ 50 Hz

• Insulation: Class F

• Temperature Rise: Class B

• NEMA Design B Torques

• Construction: Cast Iron Frame

• End Brackets & Fan Cover and Main Conduit Box

• Grounding Terminal: Inside Main Conduit Box

• Conduit Box: Oversized and Rotatable in 90 Degree Increments - F1 Mounted

• Ambient Temperature: Designed for < 40°C

• Elevation: Designed for < 3300 ft.

• Rotation: Bi-Directional

• Shaft: 1045 Carbon Steel

• Rotor Construction: Aluminum Die Cast Squirrel Cage

• Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat

• Paint Color: Premium - Light Gray - Munsell N5.0

• High Efficient - Dark Gray - Munsell 7.5B 3.5/0.5

• Bearings: Double Shielded Bearings Pre-Packed with MULTEMP SRL for F# 140JP/JM - 280JP/JM (Non-regreasable)

• Bearings: High Quality Ball (or Roller) Bearings Regreasable with Mobil Polyrex™ EM Grease for F# 280JP/JM (2P) 320JP/JM and Larger

• Automatic Grease Discharge Fittings on Regreasable Models

• Rubber Dust Flinger on DE for F# 140JP/JM - 280JP/JM

• Labyrinth Type Metal Flinger on Both Ends for F# 280JP/JM (2P); 320JP/JM and Larger

• Cast Iron Inner and Outer Bearing Caps for F# 280JP/JM (2P); 320JP/JM and Larger

• Nameplate: Stainless Steel

• Suitable for Inverter Duty (PWM - Pulse Width Modulation) per NEMA MG-1

• Part 30(3; 4)

• Inverter Duty Speed Range: 10:1 Variable Torque / 5:1 Constant Torque

• 9 Leads for 5 HP and Smaller

• 12 Leads for 7.5 HP to 125 HP

• Motors are U.L. Recognized; CSA Approved and CE Marked

• Motor service factor is 1.0 when operated on a VFD.

• Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1.

• CSA Certified for Class I Div. 2 Groups B C & D - Temp Code T3C Minimum

• CSA Certification for Hazardous Location only applies to AEHH8NJP/JM

• NEMA premium [JPP/JMP] product line.



Note: Stock catalog image shown. Actual motor may differ.