1000 HP, 3600 RPM, 2300/4160 Volts, TEFC, 450C, MEDIUM VOLTAGE, TECO, JF10002

GLOBAL MAX IEC METRIC

AFJHTK, HIGH EFFICIENCY, MEDIUM VOLTAGE [KF]

APPLICATIONS:


• Pumps
• Mills
• Fans and Blowers
• Grinders
• Compressors

  FEATURES:

  
  
  • Output: 1000 HP
  
  • Speed: 3600 RPM
  
  • Voltage: 2300/4160 Volts @ 60 Hz
  
  • Frame: 450C
  
  • Full Load Efficiency: 97%
  
  • Full Load Power Factor: 91%
  
  • Full Load Amperage: 213A
  
  • Enclosure: Totally Enclosed Fan Cooled (IP55)
  
  • Service Factor: 1.15 (Continuous)
  
  • Bearings: 400 frame motor is standard with antifriction ball bearings.
  
  • Bearings: 450 frame motor is standard with sleeve bearings and non-drive end insulated bearings; self lubricated.
  
  • Bearings: 500 frame and above
  
  • standard with sleeve bearings and non-drive end insulated bearings; force feed lubricated.
  
  • CSA Certified for Class I Div. 2 Group B C D - Temp Code T3 Maximum
  
  • Standard Features: Provisions for Bearing RTD's; 100 Ohm Platinum Stator RTD's(2/Phase); Space Heaters(120V)
  
  • Insulation: Class F
  
  • Temperature Rise: Class B
  
  • NEMA Design B Torques
  
  • Condiut Box: Oversized Fabricated Steel Main Conduit Box Rotatable in 90 Degree IncrementsFully Gasketed with NPT Threaded Entrance - F1 Mounted
  
  • Ambient Temperature: Designed for 40°C
  
  • Elevation: Designed for 3300 ft.
  
  • Rotation: Bi-Directional -- except 2 Pole which is Counter-Clockwise (CCW) facing the Drive End
  
  • Construction: Cast Iron Frame and End Brackets
  
  • Shaft: 1045 Carbon Steel
  
  • Rotor Construction: Squirrel Cage Copper Bar
  
  • Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
  
  • Paint Color: Dark Gray - Munsell 7.5B 3.5/0.5
  
  • Bearings: High Quality Ball (or Roller) Regreasable with Mobil Polyrex™ EM Grease
  
  • Bronze Labyrinth Type Metal Flinger on Both Ends
  
  • Bearing Caps: Cast Iron Inner and Outer
  
  • Grounding Terminal: Inside Main Box and on Motor Foot
  
  • Nameplate: Stainless Steel
  
  • Leads: 6 Leads with Solderless Lug Terminals
  
  • Motors are CSA Approved
  
  • Suitable for Inverter Duty (PWM - Pulse Width Modulation) per NEMA MG-1(3 / 4)
  
  • Motor service factor is 1.0 when operated on a VFD.
  
  • Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1.
  
  

  Note: Stock catalog image shown. Actual motor may differ. 

Documentation

• Dimensions
• Product Description
• Instruction Manual
• Submittal Data
• Header RTD