A variable frequency drive is an electronic device that allows you to start, stop, and control the speed of a three phase motor. It is also a motor starter as it is equipped with overload protection. Read more »
What is the difference between a 'new surplus' motor and a 'factory new' motor?
Our New Surplus electric motors and drives are new and unused overstock or discontinued items offered at lower prices and come with our 90-day warranty.
Factory New products are competitively priced and come with a manufacturers warranty.
Variable frequency drives (VFDs or inverters) now play an important part in major industry.
Within the last 10 years they have been perfected to control and vary the speed of 3 phase electric motors. They serve many purposes, besides speed control. Homeowners and hobbyist alike, who have lathes or milling machines with a 3 phase motor, usually don't have 3 phase power to operate. These VFDs (instead of using a rotary phase converter) can now be used to convert single phase power to 3 phase power. Read more »
TECO E510 NEMA 4 / 12 Variable Speed Drive With Keypad and speed potentiometer on Front Cover Factory New
The E510 NEMA 4/ 12 Variable Speed Drive is a versatile and compact AC Drive that can control today’s demanding motor driven applications in a cost effective manner. Further, the E510 provides an ideal solution for fans, pumps, mixing, and conveyors installed in non-ideal environments.
Replacement for the MA7200 NEMA 4/4X/12 Series.
Specifications
Model #: E510
Input Voltage: 230 Volts
3-Phase
Output Voltage: 230 Volts
3-Phase
Constant Torque Horsepower: .5
Constant Torque Amps: 2.6
Variable Torque HP: --
Variable Torque Amps: --
Enclosure: NEMA 4/4X/12
NEMA 1 kit part number: NOT REQUIRED
Dimensions (HxWxD): 9.79" x 5.94" x 7.87"
Input Voltage: 230 Volt 1 or 3 Phase
Output Voltage: 230 Volt 3 Phase
Constant Torque Horsepower: 0.5
Constant Torque Amps: 2.6
Variable Torque Horsepower: -
Variable Torque Amps: -
Enclosure: NEMA 4/4x/12
Additional Features: Keypad and speed potentiometer
Height: 9.79"
Width: 5.94"
Depth: 7.87"
Certification: UL, cUL, and CE Approved
Warranty: Factory New with Manufactures Warranty
Note: Photos may show a different rating
Features
Control Modes for V/F, Hz, and Sensorless Vector
Advanced Regenerative Load Handling Capability
Parameters grouped by function
0 to 599 Hz Speed Range
Conformal Coating on PC Boards
Built-in PLC Functionality
PID Process Control Loop
Sleep Mode
0-10VDC or 4-20mA Feedback
Loss of feedback or tracking detection
Built-in Modbus Protocol (RJ45 Interface)
5 Digit LED operator’s keypad
Scalable Display
Programming parameters
Diagnostics monitoring
Built-in Disconnect and Speed Pot on selected models
230V, 1Ø (0.5 to 3 HP)
460V, 3Ø (1 to 15 HP)
Digital and Analog Inputs and outputs have extremely fast (~4 msec) update time
Auto Run Mode (cyclic operation)
Power loss ride through
Automatic Voltage Regulation (AVR)
Stabilizes output voltage against fluctuating input voltage
Applications
Areas in contact with corrosive solutions
Processing areas that require periodic washdown:
Food
Beverage
Pharmaceuticals
Corrosive, dusty, humid, or other dirty environments
• Frequency setting with <, > keys
• Potentiometer on front cover
• External input terminals - AI1 (0-10VDC) - AI2 (0/4-20mA)
• Multi-function Input
• (Up/Down)
• Pulse input
Acceleration Settings
• Two sets of acceleration and deceleration times
• Jog acceleration and deceleration settings (0-3600 sec)
Voltage/ Frequency Characteristics
• Qty 18 preset V/Hz patternsplus user settable V/F pattern
• Adjustable voltage (torque) boost
Control Features
• 1-16kHz Carrier frequency(adjustable)
• Acceleration/Deceleration ramps with S curves
• Sensorless Vector mode withauto
tuning
• DC Injection braking
Input Voltage Range
230 V drives: 200-240VAC +10%, -15%
460 V drives: 380-480VAC +10%, -15%
I/O FEATURES
Digital
Inputs
• Qty 6 configurable
• Over 25 available selections
• Assign each as normally open or normally closed
• 24V power supply
• Pulse input
Digital
Outputs
• Qty 2 relay outputs
• Over 20 available selections
• Assign each as normally open or normally closed
Analog
Inputs
• Qty 2 analog input
channels - 1 at 0-10VDC - 1 at 4-20mA
• Adjustable gain and bias on each channel
Analog
Outputs
• 0-10VDC
• 5 available configurations - Output Frequency - Set Frequency - Output Current - Output Voltage - DC Bus Voltage
• Adjustable gain and bias
Safety
Input
Dedicated safety
input(factory jumpered)
PROTECTION FEATURES
Overload
Stall Prevention
Up to 150%, 1 minute on acceleration,
deceleration and constant speed
Shopping Cart (
