7.5 HP, 1200 RPM, 208/230/460 Volts, XPFC, 254T, Premium, TECO, XP7/56

TEFC - EXPLOSION PROOF

AEHHXV/AEHHXU, NEMA PREMIUM FOOTED [XP]

APPLICATIONS:


• Grain Elevators
• Pumps
• Blowers
• Applications Where Explosive Gases are Present
• Applications Where Explosive Dusts/ Grains are Present

FEATURES:


• Output: 7.5 HP

• Speed: 1200 RPM

• Enclosure: Totally Enclosed Fan Cooled - Explosion Proof (IP55)

• Voltage: 208/230/460V

• Amperate: 9.41 Amps

• Power Factor: 82%

• Efficiency: 91%

• Service Factor: 1.15 (Continuous); (1.0 @ 50 Hz)

• Class I Div. 1 Group C & D and Class II Groups E F and G - Temp Code T2D/T3B Up to and Including F# 256T

• Class I Div. 1 Group D and Class II Groups E F and G - Temp Code T2D/T3B for F# 284T and Larger

• UL File: E84757

• CSA File: #64671

• Insulation: Class F

• Temperature Rise: Class B

• NEMA Design B Torques

• Standard with Klixon 9700K Temperature Limiting Switch - 1 per Phase

• Grounding Terminal: Inside Main Conduit Box

• Condiut Box: Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted

• Ambient Temperature: Designed for < 40°

• Elevation: Designed for < 3300 ft

• Rotation: Bi-Directional

• Construction: Cast Iron Frame

• Fan Cover

• End Brackets and Main Conduit Box

• Capable of Withstanding Explosion Force as Required by UL

• Stainless Steel Breather Drains with Bronze Filters (For Horizontal Mount Only)

• Shaft: 1045 Carbon Steel

• Rotor Construction: Aluminum Die Cast Squirrel Cage

• Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat

• Paint Color: Dark Blue - Munsell 5 PB 4.5/2

• Double Shielded Bearings Pre-Packed with MULTEMP SRL for F# 140T - 280T (Non-regreasable)

• High Quality Ball (or Roller) Bearings Regreasable with Mobil Polyrex™ EM Grease for F# 280TS and Larger

• Bronze Flinger on Both Ends

• Cast Iron Inner and Outer Bearing Caps for F#280TS and Larger

• Nameplate: Stainless Steel

• VFD: Suitable for Inverter Duty (PWM - Pulse Width Modulation) per NEMA MG-1(4 / 5) - UL Listed for Inverter Duty(4 / 5)

• Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of up to 2200 Volts

• Inverter Duty Speed Ranges: VT = 3 - 60 Hz / CT for 140T - 210T Frames = 10 - 60 Hz

• CT for 250T - 320T Frames = 13 - 60 Hz / CT for 260T - 440T Frames = 16 - 60 Hz

• 9 Leads for 5 HP and Smaller

• 12 Leads for 7.5 HP to 125 HP

• 6 Leads for 150 HP and Larger



Note: Stock catalog image shown. Actual motor may differ. 

Documentation

• Perfomance Data
• Dimensions
• Product Description
• Instruction Manual
• Submittal Data
• 50Hz Perfomance Data