900 HP, 1200 RPM, 2300/4000 Volts, WPI, 5810VP, VSS, TECO, VSKP9006

VERTICAL SOLID SHAFT WPI
HIGH THRUST with "P" BASE - LOW VOLTAGE

AMRKED, PREMIUM EFFICIENCY [VSKP]

APPLICATIONS:


• Deep Well Turbine Pumps
• Irrigation
• Water/Wastewater

FEATURES:


• Output: 900 HP

• Speed: 1200 RPM

• Voltage: 2300/4000 Volts @ 60 Hz

• Frame: 5810VP

• Full Load Efficiency: 95%

• Full Load Power Factor: 81.5%

• Full Load Amperage: 109A

• Enclosure: Weather Protected Type I (WPI)

• Service Factor: 1.15 (Continuous on Sine Wave Power)

• Inverter Duty: (PWM) per NEMA® MG-1 Part 31 at 1.0 Service Factor

• Standard Features: Coupling w/ Gib Key; Ball Type NRR; Drip/Splash Cover

• Space Heaters (120V)

• Insulation: Class F with VPI Epoxy Resin Varnish

• Temperature Rise: Class B

• NEMA Design B Torques

• Conduit Box: Oversized Rotatable in 90 Degree Increments - Fully Gasketed with NPT Threaded Entrance

• Conduit Box: Cast Iron for F#449TP and Below; Steel Plate for F#5000

• Ambient Temperature: Designed for < 40°C

• Elevation: Designed for < 3300 ft.

• Rotation: Counterclockwise (CCW); Viewed from Top

• Construction: Cast Iron Frame & End Brackets

• Shaft: 1045 Carbon Steel

• Rotor Construction: Aluminum Die Cast Squirrel Cage for F#449TP and Below

• Rotor Construction: Squirrel Cage Copper or Copper Alloy Bar for F#5000

• Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat

• Paint Color: Blue - Munsell 5PB 3/8

• Bearings: Vacuum De-Gassed Re-Greasable Ball Frames -5007TP & Up with Mobil Polyrex™ EM Grease

• Guide Bearings: 324VP - 5810VP Frames are Re-Greasable with Mobil Polyrex™ EM Grease

• Thrust Bearings: 5009 - 5810VP Frames are Oil Lubricated Angular Contact or Spherical Thrust Bearing with Site Glass

• Oil Requirements: for 444VP - 5810VP Frames: 300 S.S.U. @ 100°F

• Grease Discharge Fittings: on Frames with Re-Greasable Motors

• Labyrinth Type Metal Flinger on Lower End Bracket

• Grounding Terminal: Inside Main Box

• Nameplate: Stainless Steel

• VFD Rated: per NEMA MG1

• Part 31

• Speed Ranges: 10:1 Variable Torque; 4:1 Constant Torque

• 6 Leads

• UL Recognized and CSA Approved

• Precautions Should Be Taken to Eliminate or Reduce Shaft Currents that May Be Imposed on the Motor by the VFD as stated per NEMA MG1 Part 30.4.4.3.

• Ball Type NRR Provided


Note: Stock catalog image shown. Actual motor may differ.