5 HP, 1800 RPM, 208/230/460 Volts, 3 PH, XPFC, 184TC, Footed, North American, PEXP184TC-5-4

Explosion Proof C-Flange / Feet

Applications

For use on pumps, fans, blowers, compressors, material handling and other industrial and  commercial machinery installed in damp, dusty  or dirty environments.  These motors are designed to be used in hazardous locations as defined by class and group. Suitable for use with variable frequency drives. 

Features


• Output: 5 HP

• RPM: 1800

• Voltage: 208/230/460V @ 60Hz)

• Full Load Amps: 7 A

• Enclosure: XPFC (Explosion Proof Fan Cooled)

• Frame: 184TC

• Mounting: C-face w/ rigid base

• Service Factor: 1.15

• Efficiency: 89.5 (NEMA PREMIUM)

• Bearings: 6306-ZZ / 6306-ZZ

• Shaft dimensions (dia x len): 1-1/8" x 2-2/4"

• Factory New with manufacturer's warranty

• 1.15 Service Factor @ 60 Hertz; 1.0 Service Factor @ 50 Hertz

• Sealed Bearings Through 215T Frame;

• Regreasable Open Bearings 254T Frame and Above

• Class F Insulation System; Class B Rise at Full Load;

• Class H Vacuum Pressure Impregnation (VPI) Resin for All Windings

• Hazardous Location Classi?cation:

• Stainless Steel Nameplate and Zinc Plate Hardware

• NEMA Design B Performance

• Inverter Rated (10:1 VT; 5:1 CT)

• Feet are Dual Drilled for Mounting Flexibility

• Dual Voltage Ratings Suitable for Part Wind Start on Lower Voltage

• Corrosion Resistant Epoxy Paint

• F1 / F2 Reversible

• Lifting Provision

• Cast Iron Frame Construction

• IP55 Protection

• Two (2) Year Warranty

• Explosion Proof: Class I / Div 1 / Groups C&D

• Maximum Ambient Temperature: 55 degrees C

• Operating Temperature Code: T3C


Documentation


• Data Sheet