600 HP, 900 RPM, 2300/4160 Volts, WPI, 6806B, MEDIUM VOLTAGE, TECO, P6008

GLOBAL ODP

ASHA, HIGH EFFICIENCY, MEDIUM VOLTAGE [P]

APPLICATIONS:



• Pumps

• Fans & Blowers

• Compressors



FEATURES:

 

• Output: 600 HP

• Speed: 900 RPM

• Voltage: 2300/4160 Volts @ 60 Hz

• Frame: 6806B

• Full Load Efficiency: 94.1%

• Full Load Power Factor: 84%

• Full Load Amperage: 142A

• Enclosure: Weather Protected Type I (WPI)

• Service Factor: 1.15 (Continuous)

• Standard Features: 100 Ohm Platinum Stator RTD's (2 per Phase); Space Heaters (120V)

• Insulation: Class F

• Temperature Rise: Class B

• NEMA Design B Torques

• Conduit Box: Oversized and Rotatable in 90 Degree Increments Fully Gasketed with NPT Threaded Entrance - F1 Mounted

• Ambient Temperature: Designed for 40°C

• Elevation: Designed for 3300 ft.

• Rotation: Bi-Directional Except 2 Pole which is Counter-Clockwise (CCW) facing the Drive End

• Construction: Cast Iron Frame and End Brackets

• Shaft: 1045 Carbon Steel

• Rotor Construction: Aluminum Die Cast Squirrel Cage for F#449T and Below

• Rotor Construction: Squirrel Cage Copper or Copper Alloy Bar for F#5000 and Above

• Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat

• Paint Color: Dark Gray - Munsell 7.5B 3.5/0.5

• Bearings: High Quality Ball (or Roller) Regreasable with Mobil Polyrex™ EM Grease

• Insulated Non-Drive End Bearing on 2 Pole Motors; 600 HP and Larger

• Labyrinth Type Metal Flinger on Both Ends

• Cast Iron Inner and Outer Bearing Caps

• Grounding Terminal: Inside Main Box and on Motor Foot

• Nameplate: Stainless Steel

• Suitable for Inverter Duty (PWM - Pulse Width Modulation) per NEMA MG-1(4 / 5)

• Motor service factor is 1.0 when operated on a VFD.

• Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1.

• 6 Leads

• Motors are CSA Approved

 

Note: Stock catalog image shown. Actual motor may differ.