800 HP, 1800 RPM, 2300/4160 Volts, TEFC, 6808C, MEDIUM VOLTAGE, D.E. ROLLER BEARING, TECO, KG8004R

GLOBAL XPE

AEHGTK, TEFC, NEMA PREMIUM EFFICIENCY, MEDIUM VOLTAGE [KG]

APPLICATIONS:


• Fans and Blowers

• Pumps

• Mills

• Grinders

• Compressors


FEATURES:


• Output: 800 HP

• Speed: 1800 RPM

• Voltage: 2300/4160 Volts @ 60 Hz

• Frame: 6808C

• Full Load Efficiency: %

• Full Load Power Factor: %

• Full Load Amperage: A

• Enclosure: Totally Enclosed Fan Cooled (IP55)

• Voltage: 2300/4160V

• Bearings: Roller Bearing on Drive End for Belted Loads

• Service Factor 1.15 (Continuous)

• CSA Certified for Class I; Div. 2; Group B; C; D - Temp Code T3 Maximum

• Standard Features: 100 Ohm Platinum Stator RTD's (2/Phase)

• Space Heaters (120V)

• Insulation: Class F

• Temperature Rise: Class B

• NEMA Design B Torques

• Conduit Box: Oversized and Rotatable in 90 Degree Increments Fully Gasketed with NPT Threaded Entrance - F1 Mounted

• Terminal Box Construction: Cast Iron on 444T - 449T Frames / Steel Plate on 5000 Frames and Above

• Ambient Temperature: Designed for 40°C

• Elevation: Designed for 3300 ft.

• Rotation: Bi-Directional for all 444T - 449T Frames and for 1800 - 900RPM (4 - 8 Pole) 5007 - 6808 Frame Motors / 5007 - 6808 Frame 3600RPM (2 Pole) Motors have Counter-Clockwise (CCW) Rotation facing the Drive End

• Construction: Cast Iron Frame and End Brackets

• Shaft: 1045 Carbon Steel

• Rotor Construction: Aluminum Die Cast Squirrel Cage on 444T - 449T Frames

• Rotor Construction: Squirrel Cage Copper or Copper Alloy Bar for on 5007 - 6808 Frames

• Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat

• Paint Color: Dark Gray - Munsell 7.5B 3.5/0.5

• Bearings: High Quality Ball (or Roller) Regreasable with Mobil Polyrex™ EM Grease

• Labyrinth Type Metal Flinger on Both Ends

• Cast Iron Inner and Outer Bearing Caps

• Grounding Terminal: Inside Main Box and on Motor Foot

• Nameplate: Stainless Steel

• Leads: 6 with Solderless Lug Terminals

• Motors are CSA Approved

• Suitable for Inverter Duty (PWM - Pulse Width Modulation) per NEMA MG-1(3 /4)

• Motor service factor is 1.0 when operated on a VFD.

• Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1.


Note: Stock catalog image shown. Actual motor may differ.