2 HP, 1800 RPM, 230/460 Volts, 3 PH, TEFC, 145JP, FOOTED, Teco, JPP0024

CAST IRON TEFC JP

AEHH8NJP, NEMA PREMIUM, FOOTED, CLOSE-COUPLED [JPP]

APPLICATIONS:


• Pumps


FEATURES:


• Model #: AEHH8N040002YH20-

• Output: 2 HP

• RPM: 1800

• Voltage: 230/460V @ 60Hz)

• Full Load Amps: - A

• Enclosure: TEFC (Totally Enclosed Fan Cooled)

• Frame: 145JP

• Mounting: C-face w/ rigid base

• Service Factor: 1.15(Continuous);(1.0@50Hz

• Bearings: HighQualityBall(orRoller)BearingsRegreasablewithMobilPolyrex™EMGreaseforF#280JP / JM(2P)320JP / JMandLarger

• Shaft dimensions (dia x len): 7/8" x

• New Surplus with 90 day Dealers Industrial warranty

• Speed: 1800 RPM

• Full Load Efficiency: 86.5%

• Full Load Power Factor: 78%

• Full Load Amperage: 2.78A

• Insulation: Class F

• Temperature Rise: Class B

• NEMA Design B Torques

• Construction: Cast Iron Frame

• End Brackets & Fan Cover and Main Conduit Box

• Grounding Terminal: Inside Main Conduit Box

• Conduit Box: Oversized and Rotatable in 90 Degree Increments - F1 Mounted

• Ambient Temperature: Designed for < 40°C

• Elevation: Designed for < 3300 ft.

• Rotation: Bi-Directional

• Shaft: 1045 Carbon Steel

• Rotor Construction: Aluminum Die Cast Squirrel Cage

• Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat

• Paint Color: Premium - Light Gray - Munsell N5.0

• High Efficient - Dark Gray - Munsell 7.5B 3.5/0.5

• Automatic Grease Discharge Fittings on Regreasable Models

• Rubber Dust Flinger on DE for F# 140JP/JM - 280JP/JM

• Labyrinth Type Metal Flinger on Both Ends for F# 280JP/JM (2P); 320JP/JM and Larger

• Cast Iron Inner and Outer Bearing Caps for F# 280JP/JM (2P); 320JP/JM and Larger

• Nameplate: Stainless Steel

• Suitable for Inverter Duty (PWM - Pulse Width Modulation) per NEMA MG-1

• Part 30(3; 4)

• Inverter Duty Speed Range: 10:1 Variable Torque / 5:1 Constant Torque

• 9 Leads for 5 HP and Smaller

• 12 Leads for 7.5 HP to 125 HP

• Motors are U.L. Recognized; CSA Approved and CE Marked

• Motor service factor is 1.0 when operated on a VFD.

• Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1.

• CSA Certified for Class I Div. 2 Groups B C & D - Temp Code T3C Minimum

• CSA Certification for Hazardous Location only applies to AEHH8NJP/JM

• NEMA premium [JPP/JMP] product line.

• NEMA premium [JPP/JMP] product line.