125 HP, 900 RPM, 208/230/460 Volts, 3 PH, TEFC, 447T, Crusher Duty, BALL BEARING, Teco, CDP1258

MAX-HT™ LOW VOLTAGE CRUSHER DUTY

AEHHGD, NEMA PREMIUM, DESIGN C (20 HP - 200 HP) [CDP]

APPLICATIONS:


• Crushers 
• Ball Mills/ Rolling Mills 
• Impactors 
• Any High Torque Application 
• Chippers/ Shredders

FEATURES:


• Model #: AEHHGD080125YH10-

• Output: 125 HP

• RPM: 900

• Voltage: 208/230/460V @ 60Hz)

• Full Load Amps: 310/155 A

• Enclosure: TEFC (Totally Enclosed Fan Cooled)

• Frame: 447T

• Mounting: Rigid base

• Service Factor: 1.15

• Power Factor: 80%FullLoad

• NEMA Design: C

• Efficiency: 94.1%FullLoad (NEMA PREMIUM)

• Bearings: 6320 / 6316

• Shaft dimensions (dia x len): 3-3/8" x 8-1/2"

• New Surplus with 90 day Dealers Industrial warranty

• Insulation: Class F

• Temperature Rise: Class B

• NEMA Design C: Torques Equal or Greater Than 200% Starting Torque / 250% Breakdown Torque

• Construction: Cast Iron Frame; End Brackets; Main Conduit Box; Rolled Steel Fan Cover

• Grounding Terminal: Inside Main Conduit Box

• Conduit Box: Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted

• Ambient Temperature: Designed for < 40°C

• Elevation: Designed for < 3300 ft. Elevation

• Rotation: Bi-Directional

• Shaft: High Strength 4140 AISI Steel

• Rotor Construction: Aluminum Die Cast Squirrel Cage

• Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat

• Paint Color: Dark Gray - Munsell 7.5 BG 3.5/0.5

• Fittings: Automatic Grease Discharge Fittings

• Labyrinth Type Metal Flinger on Both Ends

• Cast Iron Inner and Outer Bearing Caps

• Nameplate: Stainless Steel Nameplate

• VFD: Suitable for Inverter Duty (PWM - Pulse Width Modulation) per NEMA MG-1 Part 30(4 and 5)

• Inverter Duty Speed Range: 20:1 Variable Torque / 10:1 Constant Torque

• 12 Leads for 125 HP and Smaller

• Protection: Standard With Thermistors (PTC 140°C) 1 per Phase

• Locknut and Washer on NDE for Vertical Shaft Down Applications on F# 440 and Larger

• Drain Holes / Plugs on Both End Brackets for Vertical Applications

• Threaded One Way Breather Drains for Horizontal Mount Applications

• Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1.

• F# 5000 and with Larger with Pressed Steel Plate Main Conduit Box.

• Additional Foot Grounding Provision