What is a Variable Frequency Drive?
A variable frequency drive is an electronic device that allows you to start, stop, and control the speed of a three phase motor. It is also a motor starter as it is equipped with overload protection. Read more »
What is the difference between a 'new surplus' motor and a 'factory new' motor?
Our New Surplus electric motors and drives are new and unused overstock or discontinued items offered at lower prices and come with our 90-day warranty.

Factory New products are competitively priced and come with a manufacturers warranty.
Variable frequency drives (VFDs or inverters) now play an important part in major industry.
Within the last 10 years they have been perfected to control and vary the speed of 3 phase electric motors. They serve many purposes, besides speed control. Homeowners and hobbyist alike, who have lathes or milling machines with a 3 phase motor, usually don't have 3 phase power to operate. These VFDs (instead of using a rotary phase converter) can now be used to convert single phase power to 3 phase power. Read more »
 
 
01036OP3HFP213TC-S-Dealers Electric-Weg
View Larger
0 Star Rating
0.0
 (Be the first to Write a Review)
 
    
 

10 HP, 3600 RPM, 575 Volts, ODP, 213/5TC, Footed, High Efficiency, Fire Pump


FREE Ground Shipping
Model #: 01036OP3HFP213TC-S  
01036OP3HFP213TC-S
 
In Stock:  Yes
HP : 10
RPM : 3600
Enclosure : ODP
Frame : 213TC
Frame : 215TC
Frame Remarks : Footed
Frame Remarks : High Efficiency
Frame Remarks : Fire Pump
Volts : 575
Phase : 3
Manufacturer : WEG
Classification : Fire Pump
Item Condition : Factory New
Model : 12675497
Replaces : 01036OP3HFP213TC
Weight:  115 lbs
Retail Price$901.00
Our Price:
$740.37
You Save:$160.63 (18%)
Qty: 
 
  • Factory New
  • Output: 10 HP
  • Poles: 2
  • Frequency: 60 Hz
  • Torque: 14.7 lb.ft
  • Voltage: 575 V
  • Frame: 213/5T
  • RPM: 3530
  • Full Load Amps: 9.76 A
  • Efficiency (100%): 88.5
  • Power factor (100%): 0.87
  • Insulation: F
  • Noise: 66 dB(A)
  • No load current: 4.10 A
  • Locked rotor current (II/In): 6.4
  • Service Factor: 1.15
  • FL Amps @ High: 9.80
  • FL Eff (%): 88.5
  • C Dimension (in): 16.575

Replaces 01036OP3HFP213TC

Electric Motors
: Pump Motors
: Fire Pump: Three Phase - W01 (Rolled Steel) - ODP - High Efficiency
Catalog Number: 01036OP3HFP213TC-S
WEG id: 12675497

  • Description

    Presenting a whole new electrical and mechanical design, the new platform of Rolled Steel motors are made to run cooler, last longer and to be easier to install and maintain. The High Efficiency motors are specifically designed to meet or exceed all EPAct requirements for energy efficiency. They are certified by the Department of Energy with our Certificate of Compliance number CC029A. These Fire Pump Duty ODP motors are designed for environments where dirt and moisture are minimal and provide maximum ventilation and heat dissipation. Design B torques and energy efficient designs from 143/5T through 254/6T frames, with the UL listing for Fire Pump applications.

  • Features that make a difference
    • New ventilation system for improved thermal performance
    • New and more robust eyebolts design (frames 182/4T and up) plus an additional eyebolt on non-drive end allowing vertical shaft down lifting for frames 213/5T and 254/6T
    • Oversized diagonally split aluminum terminal box that exceeds IP55 requirements and is rotatable in 90 degrees increments for flexibility during installation
    • Option for internal AEGIS® SGR
    • Color coded/numbered leads as standard for easy wiring
    • Regreasable ball bearings on 254/6T frame as standard (optional for 182/4T and 213/5T)
    • Bearing cap as standard on flanged motors
    • Motor frame painting system 500 hours minimum ASTM B117 salt spray test
    • Suitable for VFD operation as per NEMA MG1 part 31.4.4.2


      Torque

      Turndown Ratio

      Constant

      2:1

      Variable

      1000:1

  • Standard Features
    • Rated Output: 1 to 25 HP
    • Number of Poles: 2 to 6
    • Class F insulation (B temperature rise)
    • Frame Sizes: 143/5T to 254/6T
    • Double punched base
    • Rated voltage: 208-230/460 V
    • Frequency: 60 Hz (dual rated 50 Hz 190-220/380-415V)
    • IP21 enclosure
    • F1 mounting, C face
    • Aluminum NDE endshield
    • Cast Iron flanges for improved strength (182/4TC and above), Aluminum on 143/5TC frame
    • Internal bolts, giving a clean surface to the motor, avoiding trapping materials and allowing easy paint job after assembly to the load, if required
    • Double shielded ball bearings on frames up to 213/5T. Regreasable ball bearings on 254/6T frame
    • Standard bearing cap in all frames (flanged motors only)
    • Ambient temperature: -20 °C to +40 °C
    • 1040/45 carbon steel shaft

  • Optional Features - Call Dealers for information on price and availability of optional features
    • F2 and F3 mount, Footless
    • Enclosure: ODPAO
    • Voltage: 575V, 200/400V and others (no 50Hz rating)
    • Regreasable bearings on 182/4T and 213/5T
    • Double sealed ball bearings
    • Drip cover
    • Internal Aegis® SGR
    • Space heater and thermal protection (thermostats and thermistors)

  • Applications
    • Fire Pumps

  •  Average Rating:  0 Star Rating
    0.0
     
    Write a Review