0.0

(Be the first to Write a Review)

7.5 HP, 1200 RPM, 208/230/460 Volts, TEFC, 254/6T, Footed, HVAC-With Internal Aegis Shaft Grounding Rings

FREE Ground Shipping

Model #:

00712ET3E254T-SG

00712ET3E254T-SG

In Stock: Yes

HP :	7.5
RPM :	1200
Enclosure :	TEFC
Frame :	254T
Frame :	256T
Frame Remarks :	Footed
Frame Remarks :	HVAC
Frame Remarks :	With Internal Aegis Shaft Grounding Rings
Volts :	208/230/460
Phase :	3
Manufacturer :	WEG
Classification :	HVAC
Item Condition :	Factory New
Model :	12759400

Weight:

248 lbs

Retail Price

$2,079.00

Our Price:

$1,850.31

You Save:$228.69 (11%)

Qty:

Factory New
Output: 7.5 HP
Poles: 6
Frequency: 60 Hz
Torque: 33.1 lb.ft
Voltage: 208-230/460 V
Frame: 254/6T
RPM: 1175
Full Load Amps: 22.1-20.0/9.98 A
Efficiency (100%): 91.0
Power factor (100%): 0.76
Insulation: F
Noise: 59 dB(A)
No load current: 10.1/5.03 A
Locked rotor current (II/In): 5.4
Service Factor: 1.15
FL Amps @ High: 9.98
FL Eff (%): 91.0
C Dimension (in): 22.559

Electric Motors
: AEGIS® Inside
: W01 (Rolled Steel) General Purpose TEFC

Catalog Number: 00712ET3E254T-SG

Motors with AEGIS® bearing protection ring INSIDE

The General Purpose TEFC line is composed by W01 and W22 motors.

W01 is a Rolled Steel motor that is perfect for applications where performance, robustness and light-weight are required in an all-one solution.

These motors are supplied with Aegis® bearing protection ring to avoid current flow along the motor shaft, across the bearing and return to the frame thus preventing premature bearing wear and failure due to electric currents flowing through them.

Standard features

Rated Output: 1 to 25HP*
RPM: 3600, 1800 and 1200
Class F insulation
Frame Sizes: NEMA 143/5T through 254/6T
Frequency: 60 Hz (dual rated 50 Hz 190-220/380-415V)
Degree of protection: IP55
Mounting: F-1
Doubled shielded ball bearings on frames 143/5 to 213/5T

* Others upon inquiry

Optional features

IP56 ingress protection
F-2 and F-3 mount
C-face and footless
Enclosure: TEAO and TENV
Re-greasable bearings optional on 182/4T and 213/5T
Doubled sealed ball bearings and/or bearing cap
Drip cover
Space heaters and thermal protection (thermostats or thermistors)

Contact WEG for more options

Average Rating:

0.0

Write a Review

KHN67-40/1-H-56C-Worldwide-Dealers Industrial

40:1 Cast Iron Helical & Bevel Gear Reducer, Flange In (56C), Hollow Bore Out, Worldwide, KHN67-40/1-H-56C

KHN67-10/1-H-145TC-Worldwide-Dealers Industrial

10:1 Cast Iron Helical & Bevel Gear Reducer, Flange In (145TC), Hollow Bore Out, Worldwide, KHN67-10/1-H-145TC

PE444T-125-4-BB-North American-Dealers Industrial

125 HP, 1800 RPM, 460 Volts, 3 PH, TEFC, 444T, North American, PE444T-125-4-BB

KHN77-40/1-H-213TC-Worldwide-Dealers Industrial

40:1 Cast Iron Helical & Bevel Gear Reducer, Flange In (213TC), Hollow Bore Out, Worldwide, KHN77-40/1-H-213TC

20MCM-3-5.5-12P/575-Elektrim-Dealers Industrial

5.5 HP (4 kW), 1200 RPM, 575 Volts, 3 PH, TEFC, 132M, Metric, B34 C-Flange , Elektrim, 20MCM-3-5.5-12P/575

KHN67-30/1-H-182/4TC-Worldwide-Dealers Industrial

30:1 Cast Iron Helical & Bevel Gear Reducer, Flange In (182/4TC), Hollow Bore Out, Worldwide, KHN67-30/1-H-182/4TC

KHN67-120/1-H-56C-Worldwide-Dealers Industrial

120:1 Cast Iron Helical & Bevel Gear Reducer, Flange In (56C), Hollow Bore Out, Worldwide, KHN67-120/1-H-56C

KHN97-15/1-H-254/6TC-Worldwide-Dealers Industrial

15:1 Cast Iron Helical & Bevel Gear Reducer, Flange In (254/6TC), Hollow Bore Out, Worldwide, KHN97-15/1-H-254/6TC

KHN37-15/1-H-143/5TC-Worldwide-Dealers Industrial

15:1 Cast Iron Helical & Bevel Gear Reducer, Flange In (143/5TC), Hollow Bore Out, Worldwide, KHN37-15/1-H-143/5TC

Contact Us	Check Order Status	Blog
About Us	Return Policy	Video Archives
FAQ	Privacy Policy	VFD Story

Dealers Industrial Equipment, LLC 619 Ramsey Avenue Hillside, NJ 07205
Toll Free: 800-469-3110 Phone: 908-688-1966 Fax: 908-688-1844
Email: srelaed@gmail.com
**After Hours Emergency Phone: 732-428-9677**

Order Management System by Pulse Commerce